click thumbnail image above to enlarge
8-circuit Automatic Transfer Switch
120/240VAC, 50 amp
The PowerStay™ Automatic Power Transfer System, used in
conjunction with a standby generator, provides a convenient and robust way to maintain power in a home or business
during a power outage. The PowerStay™ system senses when utility power shuts off, triggers a permanently installed
generator to start, and transfers selected circuits to generator power according to priority
assigned at installation. This system is designed for use with gas-powered, automatic choke
engines with electric/remote start kits as well as propane, natural gas and diesel-powered
generators up to 30 kilowatts. This system allows you to use a much
smaller generator to power the same complement of electrical loads which can
result in significant cost savings on the generator. Because this system
intelligently monitors all circuits and manages the total generator load
generally you can size the generator for the single largest load plus 25%.
Smart Features:
* SAFE – Prevents generator backfeed into utility power. UL 1008 Listed.
* Automatic Switching between utility and generator power – When the system
senses partial or total loss of electricity for 30+ seconds, it automatically starts
the generator (equipped with appropriate remote-starting capabilities), and
transfers the circuits to generator power according to priority assigned upon
installation.
* Integrated Subpanel – No additional subpanel is required, saving time and money.
NEMA 1-rated cabinet is suitable for flush OR surface mounting
indoors. All wires
are clearly marked, and ALL components are included in package. Circuit
breakers can be upgraded.
* Reduced Total Investment – Because of our unique design features, you can run
most circuits in your home with a moderately sized genset (about 25%
less output)
reducing your total backup power investment.
* Smart Startup/Shutdown – Limits rapid intermittent start-up and shutdown,
prolonging generator life.
* Waits up to 30 seconds after sustained power loss to start up generator
* Waits up to 30 seconds to begin transferring circuits
* Once utility power is restored, waits one minute to re-transfer circuits back to
utility
* Five minutes after re-transfer, completes generator cool down and shutdown.
* Active, Multi-channel Intelligent Load Management – In generator mode, the
system manages up to 16 individual circuits or loads based on parameters set
up at installation. As demand increases on higher-priority circuits, the system
turns off less important circuits. This allows a larger number of loads – some
intermittent – to be supported without nuisance tripping or investing in a
larger generator. Response time to load changes is set at 2
seconds.
* Built-in Battery Charger – An integrated Float charger charges your generator
battery between uses, and won’t boil your battery acid which prolongs
battery
life.
* Programmable Generator Exerciser –Tests generator on regular interval
(programmable from 1-28 days) to maintain a healthy generator.
* Generator Usage Monitor – Tracks run time to help gauge fuel consumption
(for gasoline and diesel powered gensets).
* Programmable Alarm System – Can be programmed at installation to sound an
alarm in case of expected low fuel levels.
* Flexible – Accommodates inductive and resistive loads. For gas, propane, LP gas
and diesel generators from 3500 watts (14 amp) to 30 kilowatts (125 amp).
Designed for any single phase 125/250 volt electrical application.
Specifications
| Feature |
Amount |
| Number of 1 Pole Circuits Provided |
8 |
| Load Groups Controlled (two 1 pole circuits per
group) |
4 |
| Maximum Amps at 240Vac |
50 |
| Maximum Generator Size in Watts |
12,500 |
| Number of 15 amp 1-pole breakers included |
4 |
| Number of 20 amp 1-pole breakers included |
4 |
| Number of 20 amp 2-pole breakers included |
0 |
| Number of 30 amp 2-pole breakers included |
0 |
| Number of 50 amp 2-pole breakers included |
0 |
Installer Features:
* Standard size width (14-3/8”) for easy installation between studs
* Flat front cover for flush or surface mounting
* Circuit numbers printed on sliding interlocks
* Flexible connections to load center - from bottom or either lower side of load center
* Flexible generator connections –plug-in or hardwired
* Construction friendly - Includes separate wiring harness and unique rough-in
design features
* Easy to navigate installer programming
* Works with 2 and 3 wire generator start control schemes
Item Number: 1500
Your Price: $1462.00
Shipping Weight: 55 lbs.
This item normally ships in 2 weeks after order acceptance.
|
