The Trace C-35, C-40 and C-60 PWM Controllers can be used as a PV charge
control, DC load control or DC diversion regulator in 12, 24 and 48 volt systems.
They operate in only one mode at a time, so to provide both PV charge control and low
battery load disconnect, two controls must be used. As a DC load control they
disconnect the load at a user settable low voltage and reconnect at the low voltage
reconnect point. As a diversion controller they send excess power to a "dummy
load" such as a water or space heater to regulate hydroelectric or wind generators.
All Trace controllers, when used as a charge control, have field-adjustable bulk
and float setpoints and perform automatic equalization every 30 days or whenever LVD is
reached. Equalization can be manually initiated. Order the optional
temperature sensor for more accurate battery charge control. The optional LCD
Digital Display shows battery voltage, array amps and watts, cumulative amp-hours and a
separately resettable "trip" amp-hour measurement. The digital display is
available for mounting on the front of the charge control, or with a 50 or 100 foot cable
for remote mounting in a double-gang electrical box. Made in China.
Specs
| Voltage |
12 or 24VDC |
| Charge Current |
35 amps |
| Load Current |
35 amps |
| Low Voltage Disconnect |
Yes |
| Maximum Supply Voltage (open circuit) |
55VDC |
| Dimensions (L x W x D) |
7" x 5" x 2" |
| Warranty |
|
Item Number: C-35
Your Price: $119.00
Shipping Weight: 4 lbs.
This item normally ships 5-10 business days after order acceptance.
