Using state-of-the-art, switch-mode technology, the DLS Power Supply series is
engineered with the user and variable environmental conditions in mind. Extra care has
been given to insure many years of service-free operation, even when subjected to
extremely harsh conditions. Batteries are charged quickly and efficiently without over
charging and pumps, motors, and fans operate perfectly for prolonged life. IOTA
Engineering uses advanced switch mode technology to bring to market highly sophisticated
electronic converter/power supplies at appealing affordability.
Exceptionally clean DC output insures pumps, motors, fans, and lights work
perfectly. This means longer life for any connected load; virtually no AC ripple to cause
static or premature failure of radio or television equipment.
The DLS series converter/charger quickly and efficiently charges batteries from
the full rated output of the DLS. The DLS then maintains the batteries, only putting into
the battery what is required by load or self discharge, cutting back to milliamps as the
battery requires.
Low and transient AC line voltage is a major cause of converter/power supply
failure. The DLS series converter/power supply is protected against low line voltage, as
well as spikes coming from the AC power source or from improperly adjusted generators.
The DLS series converter/power supply meets F.C.C. criteria, minimizing radio
and television equipment interference, especially on the lower frequency bands.
The DLS series converter/power supply can be used with or without a battery.
When used as a converter/power supply, the DLS model will only supply what is required by
the load. When not in use it is essentially off, reducing electricity usage.
Even in its subcompact size, the DLS series converter/power supply, at full
load, has an operating temperature half that of some switch mode electronic models. This
means substantially longer life and safer operation.
Tight line-load regulation ensures that the output voltage holds steady from no
load to full load. This keeps pumps, motors, and lights working at the correct voltage
even during brown out situations.
Proportional Fan Circuitry provides an extra measure of protection. During times
of heavy load demands, the automatic circuitry will activate the fan before thermal stress
can occur on any internal components. Reliability and durability is built into all DLS
models.
In the event the batteries or the DLS unit is wired incorrectly, the DLS
converter/power supply is protected from damage. External fuses can be quickly and easily
replaced.
The DLS-45 is compatible with both the VS-2 Voltselect switch, and the IQ3 smart
controller, which converts the charger into a 3-stage "smart" charger,
increasing the performance of your DLS-45.
Specs
| DC Output Voltage (No Load) approx. |
13.6 V (DC) |
| Output Voltage Tolerance (No Load) |
+ or - .7% |
| Output Amperage, Max Continuous |
45 Amps |
| Output Voltage (Full Load) approx. |
>13.4 V (DC) |
| Maximum Output Amps Single Surge |
45 Amps |
| Maximum Power Output, Continuous |
600 Watts |
| Ripple and Noise |
<50 mV rms |
| Input Voltage Range |
96 - 140 AC |
| Input Voltage Frequency |
47 - 63 |
| Maximum AC Current @ 96VAC |
12 Amps |
| Typical Efficiency |
>80% |
| Max Inrush Current, Single Cycle |
20 Amps |
| Short Circuit Protection |
Yes |
| Overload Protection |
>100% |
| Line Regulation |
100 mV rms |
| Load Regulation |
<1.5% |
| Fan Control |
PROPORTIONAL |
| Over Temperature |
off @ 80C |
| Working Temperature Range |
0 - 40C |
| Storage Temperature |
-20 to 80C |
| Withstand Voltage |
1500V @ leads |
| Dimensions |
7" x 6.75" x 3.75" |
| Weight |
5.8 lb |
Customers who purchased this product also ordered:
(click underlined numbers to see product pages or add to shopping cart)
External Smart Controller to make DLS Converter charge
batteries, IQ-4
Remote voltage selector switch for DLS converters, DLS-VS
Item Number: DLS45
Your Price: $169.00
Shipping Weight: 8 lbs.
This item normally ships within 1 business day after order acceptance.
