Easy to install and operate, connects portable generator to residential load
center. Allows manual transfer of individual loads to prevent overloading generator.
Each individual circuit can be transferred separately and only as needed.
Required in many areas to prevent inadvertent backfeeding of electric power from generator
into utility system which can be a safety hazard.
Up to 8 single-pole 120 volt circuits or 4 double-pole 240 volt circuits, 60
amps maximum combined load at 125 volts or 30 amps maximum combined load at 250 volts.
Each circuit provided with non-defeatable (break-before-make) double throw switch
protected with a resettable circuit breaker. Factory configured with two 20 amp breakers ganged with one handle tie, and six 15
amp breakers. Note that the 20 amp breakers MUST be
connected to 20 amp circuits in your building panel. Designed with
bottom space for hard wire connection to generator, 7500 watt maximum. Includes six
combination 1/2" - 3/4" knockouts. Dual watt meters provided for balancing
generator load with a convenience outlet that is "live" under generator power.
Includes a second interchangeable cover plate with a twist lock male L1430P power inlet receptacle so that you can also plug the
generator cordset directly into switch rather than using a separate inlet box. The
1 x 18 inch flexible conduit is pre-wired for easy connection to existing residential load
center panel. Installs in less than an hour, without pulling the electric meter or
installing a sub-panel. Suitable only for circuits protected with up to 20 amp
breakers or fuses. UL listed and CSA certified. NEMA 1 indoor flush mount
enclosure. Exclusive 24 month warranty. See
Gen/Tran® Instruction Book. Made in USA from
domestic and foreign parts, some from Mexico.
Note that this item supersedes the 30408 series which did not include the second
interchangeable cover plate with the 30 amp inlet receptacle.
Click here for installation tips on how to
install this switch without ripping out lots of finished drywall.
Customers who purchased this product also ordered:
(click underlined words to see product pages)
Cordset for connecting generator RJB10410
or RJB10425
Inlet box L1430
Straight blade plug modification for generators without twist-lock receptacle MOD6-20P
Item Number: F30508-20
List Price:
Your Price: $299.00
Shipping Weight: 17 lbs.
Dimensions H x W x D (inches): 14-3/4 x 8 x 3-1/2
This item normally ships within 2-4 business days after order acceptance.
Ground shipping and handling charges to the continental US for this item when
ordered alone are approximately $19. They are less when several items are combined
on the same order.
