Page last updated 10/16/05
DISCONTINUED AND REPLACED
BY WHISPER-100
CLICK HERE TO GO TO NEW PRODUCT PAGE
wind
turbine |
EZ-Wire
Outside |
EZ-Wire
Inside |
EZ-Wire
Diversion Load |
EZ-Wire
Terminals |
Sample Wiring Diagram |
KW Output |
KWH Output |
User Manual |
click on thumbnail image above to enlarge
Whisper 900W Wind Generator
with supplemental solar input connection
Whisper wind generators are made by Southwest Wind
Power (formerly by World Power Technology).
These are designed for gusty wind areas and marine environments. Main frame rotor
shaft and boom are stainless steel. Tilt-up governor does not rely on springs and
needs no adjustment. Rotor is made of high strength light weight injection-molded
material that is fiber reinforced. Bearings are sealed and permanently
lubricated. Generator comes with the EZ-Wire System Center which provides battery
charge control for the wind generator and plus other functions. Made in USA.
Turbine is a cast aluminum design that incorporates a unique
Patented side furling "angle governor" for over-speed protection. Output
of the turbine is three-phase AC power. Power is transmitted to the EZ wire where it
is converted to DC. Voltage is switchable in the field.
Specifications
Click for complete instruction book
in pdf format (large 1.4M file)
Wind Generator
Specifications |
| Rated Power Output |
900 watts at 28 mph |
| Output Voltage(s) |
12, 24, 36 or 48 Volts |
| Rotor & Blade Configuration |
7 ft diameter rotor, 3 blades
molded fiber reinforced |
Output Profile vs. Wind
Velocity:
7.5 mph
10 mph
20 mph
28 mph
35 mph
45 mph |
Approximate Output:
5 watts (turbine startup)
50 watts
400 watts
900 watts
890 watts
730 watts |
| Standard Mounting |
2-1/2 inch schedule 40 pipe |
| Tower Top Weight |
47 lbs |
| Warranty |
2 years |
EZ-Wire I System Center
Specifications |
| Maximum Wind Generator Input |
80 amp dc rectifier (Note 1) |
| Other Input(s) such as Solar PV, engine generator, battery charger,
etc. |
40 amps dc max, (1) 40 amp breaker provided
(700 watts solar maximum) |
| Load Output(s) |
40 amps dc max, (1) 40 amp breaker provided |
| LED Metering |
state of battery charge
battery volts
net battery amps
wind generator amps
other sources amps
load amps |
| Diversion Load Required |
1600 watts (Note 2) |
Notes:
1) Generator actually has 3 phase ac output which is converted to dc by bridge
rectifier.
2) During windy conditions when batteries are fully charged excess power is
automatically switched to the diversion load.
Customers who purchased this product also ordered:
(click underlined words to see product pages)
Manufacturer recommended lightning arrester LA-302-DC
Tower kits TOW-24-WHI, TOW-30-WHI,
TOW-50-WHI, TOW-65-WHI or TOW-80-WHI
Bare augers TOW-AUG-36, TOW-AUG-48,
or
Galvanized augers TOW-AUG-36G, TOW-AUG-48G, TOW-AUG-60G
Item Number: H40-PV
Your Price: $1,923.00
Shipping Weight: 94 lbs.
This item normally ships 5-10 business days after order acceptance.
Shipping will be added based on your zone and item weight. Click
here to view our current shipping rate table. Shipping is less when several items are combined
on the same order.
