Description
Tripp Lite's Smart Pro 700 Hospital-Grade UPS System provides intelligent,
line-interactive battery backup for personal computers, network workstations and servers.
700 VA of battery backup allows you to work through short blackouts or safely shutdown
during longer ones. The unit has 4 hospital-grade outlets, diagnostic LEDs, and a built-in
serial port that works with PowerAlert Software to provide automatic unattended shutdown.
Tripp Lite's PowerAlert Software is the only UPS software capable of managing every type
and brand of UPS on your network, from every manufacturer and is Year 2000 Compliant. UL
544 Hospital Grade rating.
Key Buying Points
UL 544 Hospital Grade rating for medical and dental equipment - leakage current <30
micro amps
Built-in isolation transformer reduces leakage currents of connected loads
700 VA output power rating (450 watts)
Up to 45 minutes typical backup time
4 protected hospital-grade, outlets; 6-ft. cord with hospital-grade plug
DB9 serial port for network interface; SNMP compatible
Line-interactive with 4 levels of automatic voltage regulation (AVR)
Complete surge protection and EMI/RFI noise filtering
PowerAlert unattended shutdown software and 6-ft. network cable included
EXCLUSIVE from Tripp Lite: PowerAlert Software compatible with every brand of UPS, from
every manufacturer
Year 2000 compliant
Diagnostic LEDs (indicate 17 performance conditions)
Area Applications
Laboratories, nurses' stations, medical/dental offices, stationary/mobile medical
record systems, and non-life support applications within patient-care areas.
Typical Applications
Network workstations, small office servers, hubs, routers, personal computers, and
more.
Package Includes
Smart Pro 700 Hospital-Grade UPS System
PowerAlert Software and 6-ft. network cable
Instruction manual
Specifications
UPS type Line Interactive UPS protects connected equipment from
blackouts, brownouts, overvoltages, surges and line noise. Includes RS-232 LAN port and
bundled software. Features UL544 Hospital Grade rating.
Input/output voltage 120
Input/output frequency (Hz) 60
Ouput VA 700
Output watts 425
On-line waveform Pure Sine
On battery waveform PWM Sinusoidal
Voltage regulation Line interactive system corrects voltage to nominal levels, boosting
input between 86 to 112 volts and reducing input between 127 and 145 volts. Output voltage
in battery mode is regulated to 120 volts +/- 5%.
Full load runtime (min.) 6
1/2 load runtime (min.) 20
Typical runtime (PC w/15" mon.) up to 45 min.
External battery compatible n/a
Recharge rate to 90% (hours) 2-4
Transfer time (milliseconds.) 2-4
Suppression joule rating 180
Maximum surge current (amps) 13,500
Suppression response time 5 nanoseconds (Protection between H-N only to meet Hospital
Grade leakage requirements).
EMI/RFI noise reduction Greater than 80 dB @ 1 MHz
High volt switch to battery 145
Low volt switch to battery 86
UPS supported outlet type / qty. 3 NEMA 5-15R
Cord length 6 feet
Dimensions HxWxD (inches) 11 x 7 x 9
Shipping weight (lb..) 28
Fax/modem surge protection Not included. Order add-on module #DTEL2.
Network interface port Built in DB9 SMART communications port for use with bundled
PowerAlert Plus software and cabling.
Software & cable included Includes cable and CD-ROM with PowerAlert Plus software.
Product warranty (yr.) 2
Connected equipment warranty n/a
Battery access Battery Door
Controls, indicators and additional features Includes system on/off and battery test
switches, and LEDs to indicate 17 status levels, such as on-line/on-battery operational
status, voltage input correction activity, battery & battery charger status, load
level, and audible alarms. Hospital Grade plug and outlets with 3-way line isolation and
less than 30 milliamps of leakage.
Specs
