Solid state time delay relay. Economical device for
introducing a time delay into low current 120VAC circuits such as coils of other
relays. Time setting easily adjusted using a screw driver. Only two fast-on
connections. Single normally open contact is rated at 1 amp resistive.
This functions as an on-delay relay. When power is applied to
input terminals, the time delay starts. At the end of the preset time delay, the
output contacts transfer, connecting the load. Reset by removing power.
Select time range using drop down menu when ordering
Available ranges are:
0.05 to 1 seconds
0.25 to 5 seconds
0.5 to 10 seconds
3 to 60 seconds
