Page last updated 10/21/05
THIS ITEM IS DISCONTINUED
SEE FOLLOWING ALTERNATIVES: 302110-20, 30310A
click on thumbnail
image above to enlarge
Manual Transfer Switch
Coleman Powermate
30 amp total, 10 circuits
surface mount
Easy to install and operate, connects portable generator to residential load
center. Allows manual transfer of individual loads to prevent overloading generator.
Each individual circuit can be transferred separately and only as needed.
Now required by Article 702.6 of the 2002 National Electric Code to prevent inadvertent backfeeding of electric power from generator
into utility system which can be a safety hazard.
Up to 10 single-pole 120 volt circuits or 5 double-pole 240 volt circuits, 60
amps maximum combined load at 125 volts or 30 amps maximum combined load at 250 volts.
Each circuit provided with non-defeatable (break-before-make) double throw switch
protected with a resettable circuit breaker. Factory configured with ten 15 amp
breakers. Twist lock male L1430P power inlet
receptacle for cable connection to generator, 7500 watt maximum. Dual watt meters
provided for balancing generator load. Indicator light controlled by rocker switch
provided to show when utility power is restored. Flexible conduit is pre-wired for
easy connection to existing residential load center panel. Installs in less than an
hour, without pulling the electric meter or installing a sub-panel. Suitable only
for circuits protected with up to 20 amp breakers or fuses. UL listed. NEMA 1
indoor surface mount enclosure. Made in USA.
Note that this switch comes with a NEMA L1430C connector that fits
the inlet on the front of the switch which can be used to assemble your own
generator cable.
Specifications
| Total Capacity |
7500 watts, 30 amps |
| Single Pole Circuits - 120VAC |
(6) 15 amp |
| Double Pole Circuits - 240VAC |
(2) 15 amp with handle tie |
| Generator Connection |
NEMA L1430P
male inlet plug-in |
| Generator Load Watt Meters |
Yes |
| Enclosure Type |
indoor surface mounted |
| Convenience Receptacle |
No |
| UL Listing |
UL98 (this product should be installed
before the next NEC is issued in 2005) |
| UL Short Circuit Withstand Rating |
1,000 amps |
Customers who purchased this product also ordered:
(click underlined words to see product pages)
Cordset for connecting generator RJB10410
or RJB10425Y
Straight blade plug modification for generators without twist-lock receptacle MOD6-20P
Item Number: PA0650080.01
List Price: $324.99
Your Price: $249.00 $169.00
Shipping Weight: 18 lbs.
This item normally ships within 2-3 business days after order acceptance.
Shipping will be added based on your zone and item weight. Click
here to view our current shipping rate table. Shipping is less when several items are combined
on the same order.
