|
click on thumbnail
image above to enlarge
Surge Arrester / 20A Circuit Breakers
Combination surge arrester module and two single pole 20 amp circuit breakers.
Plug-on load center panel mounting is simple to install. This one device will
protect your entire downstream electrical system although surge protectors are still
recommended at sensitive appliances, electronic equipment and computers. Illuminated
LEDs indicate that surge protection is functional. This device is perfect for
retrofit since it replaces two 1 inch breakers without losing any spaces in your panel.
UL Listed, meets UL 1449 and ANSI C62.11-1987 requirements. CSA Listed.
Circuit breakers are Siemens type QP with a non-interchangeable trip and have a UL
interrupting rating of 10,000 amps RMS symmetrical at 120/240V AC. This item is UL
Listed for use with Siemens load center panels but will also fit many other manufacturers'
load center panels that accept standard interchangeable 1 inch breakers. Note, this
item may not fit GE load centers even though they use interchangeable 1 inch
breakers. Warranty $10,000.
Detailed Specifications
| Parameter |
Value |
| Secondary Surge Arrester Voltage Rating |
175V AC maximum, line to ground |
| Clamping Voltage @ 1 ma leakage current |
360V |
| Discharge Voltage @ 1,500 amps |
600V line to neutral |
| Discharge Voltage @ 3,000 amps |
750V line to neutral |
| Discharge Voltage @ 5,000 amps |
800V line to neutral |
| Discharge Current Rating |
10,000 amps, line to neutral |
| Peak Current Rating |
40,000 amps |
| Transient Energy Rating |
460 joules, line to neutral
920 joules, line to line |
Item Number: QSA2020
Your Price: $139.00
Shipping Weight: 2 lb.
This item normally ships 2-7 days after order acceptance.
|
